Router login
Router login IP addresses
Every router has a private address for its admin page. Pick yours to see the default username and password for each brand, step-by-step login help and fixes when the page will not open.
Which address does my router use?
Your router's address is your device's "default gateway". On Windows run ipconfig and read the Default Gateway line; on a phone, open your Wi-Fi network details. Our guide on finding your router's IP address has steps for every device.
How to log in to your router
- Connect to the router's Wi-Fi or plug in a network cable. Turn off mobile data and any VPN.
- Type the router's address (for example 192.168.1.1) into the browser's address bar — not the search box — and press Enter.
- Enter the username and password from the sticker on the router, or the brand default from the table below.
- Once you are in, change the admin password and update the firmware. Default passwords are the most common way routers are taken over.
Why can't I open my router page?
The most common reasons are typing a letter instead of a number (192.168.l.1 instead of 192.168.1.1), being connected to mobile data or another Wi-Fi network, or the router using a different address. A VPN can also send the request somewhere else — turn it off briefly and try again.
Reference
Default router login by brand
The usual admin address, username and password for each brand. Routers from internet providers often have a unique password printed on the label instead — check it first.
| Brand | Login address | Username | Password |
|---|---|---|---|
| Airtel Xstream, PLDT, Converge | 192.168.1.1 | admin | printed on the label |
| ARRIS / SURFboard cable modems | 192.168.100.1 | admin | password (status page usually needs no login) |
| ARRIS gateways | 192.168.0.1 | admin | password |
| ASUS (newer models) | 192.168.50.1 | admin | admin, or set at first login |
| ASUS (older models) | 192.168.1.1 | admin | admin |
| AT&T gateways | 192.168.1.254 | — | Device Access Code on the side label |
| AVM FRITZ!Box | 192.168.178.1 | — | FRITZ!Box password on the underside label |
| Belkin (older models) | 192.168.2.1 | (blank) | (blank) |
| BT Smart Hub / Home Hub | 192.168.1.254 | — | admin password on the back of the hub |
| D-Link | 192.168.0.1 | admin | (blank) |
| GL.iNet travel routers | 192.168.8.1 | — | you create it at first login |
| Huawei fiber ONT | 192.168.100.1 | printed on the label | printed on the label |
| Huawei mobile Wi-Fi / 4G routers | 192.168.8.1 | admin | admin, or printed on the label |
| Huawei Wi-Fi routers | 192.168.3.1 | — | set during first setup (often same as Wi-Fi password) |
| JioFiber router | 192.168.29.1 | admin | Jiocentrum on many units, or printed on the label |
| Linksys | 192.168.1.1 | admin | admin |
| MikroTik | 192.168.88.1 | admin | (blank) on older units; newer units print it on the label |
| Netgear | 192.168.0.1 | admin | password |
| Netgear (some models) | 192.168.1.1 | admin | password |
| Piso WiFi vendo portal | 10.0.0.1 | — | no login needed for users |
| SMC | 192.168.2.1 | admin | smcadmin |
| Some Cisco and Ubiquiti setups | 10.0.0.1 | admin / ubnt | set by the installer |
| Technicolor / Thomson | 192.168.1.254 | admin | printed on the label |
| Telekom Speedport | 192.168.2.1 | — | device password on the label |
| Tenda | 192.168.0.1 | — | (no password by default) |
| TP-Link (newer models) | 192.168.0.1 | — | you create it at first login |
| TP-Link (older models) | 192.168.1.1 | admin | admin |
| Virgin Media Hub | 192.168.0.1 | — | printed on the hub |
| Vivo Fibra router | 192.168.15.1 | admin | printed on the label |
| Xfinity (Comcast) gateway | 10.0.0.1 | admin | password (you are asked to change it) |
| Xiaomi / Mi router | 192.168.31.1 | — | set during first setup |
| ZTE / Huawei ISP fiber routers | 192.168.1.1 | admin or user | printed on the label |
| ZTE fiber ONT | 192.168.100.1 | user or admin | printed on the label |